Graphtec CE5000 Specifications

Technical specifications

 

Item
CE5000-40-CRP
CE5000-60
CE5000-120
CPU 32-bit CPU
Configuration Grit rolling
Drive system Digital servo
Maximum cutting area 375 mm x 50 m 603 mm x 50 m 1213 mm x 50 m
Range of guaranteed precision 356 mm x 2 m*1 584 mm x 5 m*1 1194 mm x 5 m*1
Compatible media widths Minimum: 50 mm
Maximum: 484 mm		 Minimum: 50 mm
Maximum: 712 mm		 Minimum: 85 mm
Maximum: 1346 mm
Maximum media thickness 0.25 mm
Maximum cutting speed 60 cm/s (in all directions) 100 cm/s (45°direction)
Specifiable cutting speeds 1-10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/s 1-10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, * cm/s
Cutting force 0.2-2.9N (20 gf to 300 gf) (31 levels) 0.2-4.4N (20 gf to 450 gf) (38 levels)
Minimum character size Approximately 5 mm for alphanumeric characters
(varies depending on the medium, font, etc.)
Mechanical resolution 0.005 mm
Programmable resolution GP-GL: 0.1/0.05/0.025/0.01 mm; HP-GLTM *2: 0.025 mm
Repeatability precision 0.1 mm or less per 2 m*1
No. of pens mountable 1 pen
Compatible cutter type Supersteel cutter blades
Compatible pen type Water-based fiber-tip pens
Compatible cutting film Marking film (PVC, fluorescent, or reflective film) up to 0.25 mm in thickness (excluding high-luminosity reflective film)
Interfaces RS-232C/USB 2.0 (Full Speed)
Buffer capacity 2 MB
Command modes GP-GL, HP-GLTM *2(selected on the control panel)
Display panel Liquid crystal display (16 characters x 1 row)
Rated power supply 100 to 240 V AC, 50/60 Hz
Power consumption 100 VA
Operating environment 10°C to 35°C, 35% to 75% RH
Conditions for guaranteed precision 16°C to 32°C, 35% to 70% RH
External dimensions
(W x D x H)*3		 Approx. 623 x 285 x 223 mm Approx. 851 x 585 x 1004 mm Approx. 1,487 x 744 x 1194 mm
Weight*3 Approx. 9.4 kg Approx. 25 kg Approx. 40 kg

*1 Varies depending on the type of Graphtec-authorized film and the cutting conditions.

*2 HP-GLTM is a registered trademark of Hewlett-Packard Company.

*3 Including the stand